Content
Paclobutrazol 90%-95% TC is a technical concentrate of the plant growth regulator paclobutrazol, typically supplied as a crystalline solid with 90 to 95 percent active content, intended for formulators who convert it into finished products such as suspension concentrates, wettable powders, emulsifiable concentrates, and granules. The technical grade is not sold directly to growers in most markets, so its value lies in consistent purity, low impurity levels, and reliable physical properties that let formulators produce predictable end products.
For buyers, distributors, and formulation plants comparing supplies, the practical conclusion is that the purity percentage, impurity profile, moisture content, and certificate of analysis matter more than the headline number alone. A TC lot at the lower end of the range may need more material per formulated kilogram, change the active content of the finished product, and create quality variation between batches. Choosing a supplier who documents each lot clearly protects both formulation accuracy and downstream field performance.
Typically 90 to 95 percent paclobutrazol
White crystalline or fine powder
Formulators and product registrants
Lot to lot consistency and purity
A plant growth regulator technical material is the basic active chemical produced at high purity before any formulation, carrier, or additive is introduced. Technical materials move through a supply chain that typically runs from chemical manufacturer to formulator, then to distributor, and finally to the grower or landscaper who applies the finished product.
Formulators blend the technical material with surfactants, dispersants, solvents, and carriers to create products that can be measured, mixed, and applied safely in the field. Registrants use technical data to support product registration files. Quality laboratories use reference standards derived from technical material to check the active content of finished products.
Manufacturing processes rarely produce exactly the same purity every time, so specifications usually allow a range. A specification of 90 to 95 percent means the manufacturer guarantees that the active content falls within those limits, with the exact value reported on each certificate of analysis. Formulators must calculate the amount of technical material needed based on the actual certified purity, not the nominal figure.
Paclobutrazol belongs to the triazole chemical family and works by inhibiting gibberellin biosynthesis, a hormone pathway that drives stem elongation, so treated plants grow shorter, thicker, and more compact. This property makes it one of the most widely used growth regulators in horticulture, turf, and fruit production.
Gibberellins stimulate cell division and cell elongation in shoots. Paclobutrazol blocks an early step in the gibberellin pathway, reducing the availability of the active hormones in growing tissue. Internodes shorten, leaves become darker green, and root growth often improves relative to shoot growth. Growers use these effects to keep ornamental plants marketable, reduce lodging in certain crops, and manage vigor in fruit trees.
Paclobutrazol is absorbed through roots when applied to soil and through leaves and bark when applied as a foliar or trunk treatment. Once inside the plant, it moves mainly upward in the xylem with water. This upward movement explains why soil drenches often affect new shoots more strongly than older tissue, and why application timing relative to flush growth matters so much.
A complete technical specification sheet defines active content, impurity limits, moisture, appearance, and physical properties, and each lot should be checked against that sheet before it enters a formulation line.
Active content is usually measured by high performance liquid chromatography against a reference standard of known purity. Laboratories should run replicate injections and report the mean with its variation. A purity result that differs by more than about one percentage point between two independent laboratories should trigger a retest before the lot is released.
Process related impurities, residual solvents, and isomers can alter performance and regulatory acceptance. Specifications commonly limit individual impurities and total impurities, and buyers should request the impurity profile along with the main assay. Lots with unusual peaks in the chromatogram deserve closer review even if the total purity looks acceptable.
Moisture content is measured by Karl Fischer titration and should stay low enough to prevent caking during storage and clumping during milling. The melting range confirms identity and crystalline quality, while color and particle appearance provide a quick visual check before sampling.
| Parameter | Typical Requirement | Method Commonly Used |
|---|---|---|
| Active content | 90 to 95 percent | High performance liquid chromatography |
| Moisture content | Low single digit fraction of a percent | Karl Fischer titration |
| Melting range | Narrow range consistent with identity | Capillary melting point apparatus |
| Appearance | White to off white crystalline solid | Visual inspection |
| Related impurities | Within agreed individual and total limits | Chromatographic impurity profile |
Paclobutrazol has low solubility in water and moderate solubility in common organic solvents, and these properties determine which formulation routes are practical for a given manufacturing plant.
Because water solubility is limited, water based products usually take the form of suspension concentrates or wettable powders rather than true solutions. Solvent based emulsifiable concentrates are possible where solvent systems are acceptable and regulations allow them. Formulators select the route based on target market, equipment, and safety standards.
For suspension concentrates and wettable powders, the technical material is often milled to a fine particle size so the final product disperses evenly in the spray tank. Mill settings must balance fineness against dust generation and energy use. Consistent feed material with controlled moisture makes milling more predictable.
The technical solid is chemically stable under normal storage conditions when protected from moisture, strong acids, strong bases, and high heat. Storage in sealed containers at moderate temperatures keeps purity within specification over many months, though exact shelf life should be confirmed with the manufacturer's data.
A technical concentrate becomes useful to growers only after formulation adds carriers and additives that make it measurable, mixable, and safe to apply. The formulation type determines how the active is delivered and how the product behaves in the spray tank or soil.
| Formulation | Carrier | Handling Profile | Common Use |
|---|---|---|---|
| Suspension Concentrate (SC) | Water | Low odor, requires agitation | Foliar and soil treatments |
| Wettable Powder (WP) | Solid inert filler | Dust risk when measuring | Foliar sprays in horticulture |
| Emulsifiable Concentrate (EC) | Organic solvent | Solvent odor and flammability | Where solvent systems are permitted |
| Granule (GR) | Solid granular carrier | Ready to apply, no mixing | Soil and turf applications |
Formulators typically choose the route that fits the registration pathway in the target country, the equipment available to growers, and the labor safety expectations of the market. A plant that exports to several regions may maintain two or three formulations from the same technical lot.
A disciplined workflow from receiving to release prevents most quality problems before they reach the market, and each step should leave a documented record.
Retaining a sample from each technical lot and each finished batch allows investigations months later if a complaint arises. Batch records linking technical lot numbers to finished product lots make recalls and traceability reviews much faster.
Paclobutrazol is used across ornamentals, turf, fruit production, and selected field crops, where growers aim to control vigor, improve flowering, or keep plants compact for market. Registered uses vary by country, so the local label defines the permitted crops.
Growers of potted flowers, bedding plants, and woody nursery stock use paclobutrazol to keep plants shorter and more saleable. Compact plants ship more easily and need less staking, which lowers labor cost and damage risk.
Golf courses, sports fields, and lawns use growth regulators to reduce mowing frequency and clipping production. Slower shoot elongation can also help turf allocate resources to root and crown development.
In mango and some other tropical and subtropical fruit trees, growers use paclobutrazol to reduce vegetative flush and encourage flower bud formation. Timing relative to growth cycles and tree vigor is critical, since treatment at the wrong stage can reduce yield rather than improve it.
Dose and method must follow the registered label and local recommendations, because the same active ingredient can produce strong growth suppression at one rate and unwanted damage at another.
Soil drenches are common for trees and large containers because roots take up the active and carry it upward into the canopy. Foliar sprays act more quickly on the treated leaves but usually produce a weaker and shorter effect on new growth. Choosing between them depends on crop, container or soil system, and the response the grower wants.
Labels often scale the dose to canopy size, trunk diameter, pot volume, or area treated. Doubling the dose rarely doubles the benefit and frequently increases the risk of leaf distortion, reduced root growth, and delayed flowering in sensitive crops.
Applications are usually made when vegetative flushes are complete or when the crop is entering the period when restraint is desired. Applying during active flush can produce a sudden suppression that the plant corrects later, causing uneven growth that looks worse than the untreated crop.
| Method | Speed of Response | Typical Duration | Main Risk |
|---|---|---|---|
| Soil drench | Slower, through root uptake | Often many months | Overdosing into root zone |
| Foliar spray | Faster on treated tissue | Shorter, usually weeks | Leaf injury at high rates |
| Trunk injection or bark treatment | Moderate | Variable by tree and season | Wounding and uneven distribution |
Paclobutrazol persists in soil for a period that depends on soil type, temperature, moisture, and microbial activity, so growers and regulators should consider carryover to following crops.
Soil half life is often reported in the range of several months, and it can be longer in cool, dry, or low organic matter soils. Carryover can affect sensitive successor crops, so growers often check label restrictions on replanting intervals before making drench applications.
Because the active has limited water solubility, runoff in dissolved form is usually modest compared with highly soluble products, but particulate losses can still occur in erosion prone sites. Buffer zones, careful irrigation scheduling, and avoiding application before heavy rain reduce environmental risk.
Residue levels in fruit, vegetables, and other harvested parts are controlled by maximum residue limits set by food safety authorities in each market. Growers exporting produce should follow the label intervals before harvest and keep records that support compliance.
Safe handling of the technical material protects workers in the plant, the drivers who transport it, and the applicators who eventually use finished products.
Dust control is the main concern when handling solid technical material. Workers should use respiratory protection suited to powder exposure, chemical resistant gloves, eye protection, and protective clothing. Local exhaust ventilation at weighing and charging stations reduces airborne concentrations.
Store the technical material in sealed original containers in a dry, ventilated, locked area, typically between 10 and 30 degrees Celsius, away from food, feed, seed, oxidizers, and strong acids or bases. Protect bags and drums from moisture, because water uptake can cause caking and affect later milling.
Transport must follow applicable dangerous goods rules in the country of shipment and destination. Shipping documents should include the safety data sheet, the certificate of analysis for the lot, and the correct transport classification for the packaging used.
Keep spill kits, absorbent materials, and clear first aid instructions available at storage and mixing areas. Train staff to avoid dry sweeping of powder, which generates dust, and to use wet methods or approved vacuum equipment for cleanup.
Regulatory approval for paclobutrazol differs widely between countries, so any plan to manufacture, import, or sell technical material or finished products must begin with a check of current national rules.
Some markets register the active ingredient and specific formulations separately, while others restrict use to certain crops or set limits on maximum application rates. Importers should confirm whether the technical material and each finished product are registered and whether any import permits apply.
Buyers commonly request a certificate of analysis, a safety data sheet, impurity profile data, and sometimes a letter of authorization or registration number. Consistent documentation for each lot speeds customs clearance and supports regulatory audits.
Most complaints about technical material trace back to lower than expected purity, caking from moisture exposure, or inconsistent sampling rather than to the chemistry itself.
When finished products test below their labeled content, check whether the charge calculation used the certified purity, whether the sample was representative, and whether the analytical method was validated. A lot at the bottom of the purity range should be charged with proportionally more material to reach target active content.
Caking typically reflects moisture uptake during storage or transport. Dry the material if the supplier permits, avoid opening containers in humid conditions, and sieve lumps before milling to protect equipment and maintain consistent feed rates.
Weak growth suppression can come from incorrect dose, poor timing, low soil moisture limiting uptake, or formulation problems such as poor dispersion. Confirm the finished product's active content and suspensibility before concluding that the technical material is at fault.
Question: What does paclobutrazol 90%-95% TC mean?
It describes a technical concentrate containing 90 to 95 percent paclobutrazol, sold as raw material for formulators who make finished growth regulator products.
Question: Why does the active content range matter for formulators?
Formulators must calculate the charge quantity from the certified purity of each lot, otherwise the finished product may fall below or above its labeled active content.
Question: How does paclobutrazol control plant height?
It inhibits gibberellin biosynthesis, reducing stem elongation so treated plants grow shorter and more compact.
Question: What formulation types are made from the technical material?
Common routes include suspension concentrates, wettable powders, emulsifiable concentrates, and granules, each selected based on market regulation and grower equipment.
Question: What quality tests should a technical lot pass before release?
Core checks include active content by chromatography, moisture by Karl Fischer titration, melting range, appearance, and a documented impurity profile.
Question: How should technical paclobutrazol be stored?
Keep sealed original containers in a dry, ventilated, locked area, typically between 10 and 30 degrees Celsius, away from food, feed, and incompatible chemicals.
Question: Why does soil drench behave differently from foliar spraying?
Soil drenches are taken up by roots and move upward, producing longer lasting effects, while foliar sprays act on treated leaves and usually give a shorter response.
Question: Can paclobutrazol persist in soil and affect following crops?
Soil persistence can extend for several months depending on soil type, temperature, and moisture, so label restrictions on replanting should be checked before use.
Question: What causes caking in stored technical material?
Caking usually results from moisture uptake when containers are opened in humid conditions or stored without proper sealing, which can also affect milling performance.
Question: Is paclobutrazol approved in every country?
No, registration status and permitted uses vary by country and change over time, so importers and growers must verify current national regulations before manufacture, import, or application.